Description
After selecting a suitable felt thickness (tested on key) and the corresponding wedges, the keys are clamped onto the key clamp, bottom-side-up. Apply fish glue onto one side of a 9mm-strip bushing cloth. The strip is now placed over the entire set of front key bushing holes of white or sharp keys. The rest is carried out by the BushmasterTM almost unaided. The first step is to hold one end of the bushing strip tight while the tool presses the bushing to the correct depth automatically. In the second step, the tool’s blade will cut the bushing felt. The tool is removed and replaced by a bushing wedge. Repeat procedure for the whole set of keys. Any spare bushing cloth can be trimmed off flush with a cutter or with a bushing knife.
Technical data
| Supplier no. | 420300 |
|---|---|
| MPN | 8070 |
| Weight | 0.2068 kg |
| Unit | pce |
| Categories | 100 / Tools - Equipment / General - workshop equipment / Cutting tools; 100 / Tools - Equipment / Keyboard / bushing |
Documents
Specification
Product number: 420300