Description
Buffing, primer for french polish
For shellac polishes. The primer is applied with a with a pad, but can also be applied by brush or roller! rolled!
Priming with this buffing primer instead of matting and pore filler makes polishing and the actual base polish much easier. and the actual base polish.
KIROL-SCHELLACKPOLITUR is a product made from high quality natural products for
the execution of handmade polishes.
SCHELLACKPOLITUR was still in the beginning of the 20th century by the cabinet maker himself
by dissolving shellac and other natural resins in wine spirit itself. Also, KIROL
SCHELLACKPOLITUR is such a rich product. The advantage for the user lies
At least, he can at least deficiencies due to faulty polishing approaches and the effort and
avoid the time required for production.
For 25 years, KIROL-SCHELLACKPOLITUR has been handcrafted by Farben-Kiroff-
Technique made. KIROL-SCHELLACKPOLITUR consists of purified waxy and
wax-free Indian shellac.
Processing:
The surfaces must be dry and free from contamination.
Unpleasant can be the presence of silicones and surfactants, as in almost all
modern paints and cleaners are used. In principle, effect varnishes (for example:
Hammered paint) not in the same room processed in particular be sprayed! Water in
Form of condensing humidity, introduced by inferior alcohol or
Water-dampened tools can cause loss of gloss and haze.
Workflow:
a) cleaning and sanding.
b) Priming with SCHWABBEL-POLISHING-BASE 26.20.20 instead of matting and
Pore ??filler, makes the Zupolieren and the actual basic polish significantly (historically
Early 20th century).
Important: shake up the KIROL-SCHELLACKPOLITUR before use!
c) Polish with KIROL-SCHELLACKPOLITUR, BIMSMEHL, KIRAD-POLIEROEL
d) polishing with KIROL-SCHELLACKPOLITUR, BIMSMEHL, KIRAD-BENZOE and KIRAD-
GRINDING FLUID
The use of polishing oil instead of linseed oil and grinding fluid instead of turpentine oil
reduce many problems and facilitate the polishing significantly, without affecting the
"Historical surface". Only 99% pure spirit should be used for the entire polish
become available with us as polishing alcohol 26.20.40. Depending on your liking and habit, the
Polish up to 70% with Siritus.
Addition of dilution 26.20.10 may slightly delay drying, if desired
become.
Further information and instructions for working with KIROL polishes can be found in our
Webshop: www.pianoteile.com
Characteristics:
Color: Lemon bright
Processing temperature: 21 ° C <= T <= 30 ° C
Rel. Humidity (F): 40% <= F <= 60%
Storage: cool, keep well closed! Pre-heat to at least 18 ° C before use!
KIROL SCHELLACKPOLITUR Additives:
Blonde 1 L 26.15.20
blond 5 L 26.15.21
black 1 L 26.15.30
black 5 L 26.15.31
Polished spirit 5 L 26.20.40
Dilution 1 L 26.20.10
For shellac polishes. The primer is applied with a with a pad, but can also be applied by brush or roller! rolled!
Priming with this buffing primer instead of matting and pore filler makes polishing and the actual base polish much easier. and the actual base polish.
KIROL-SCHELLACKPOLITUR is a product made from high quality natural products for
the execution of handmade polishes.
SCHELLACKPOLITUR was still in the beginning of the 20th century by the cabinet maker himself
by dissolving shellac and other natural resins in wine spirit itself. Also, KIROL
SCHELLACKPOLITUR is such a rich product. The advantage for the user lies
At least, he can at least deficiencies due to faulty polishing approaches and the effort and
avoid the time required for production.
For 25 years, KIROL-SCHELLACKPOLITUR has been handcrafted by Farben-Kiroff-
Technique made. KIROL-SCHELLACKPOLITUR consists of purified waxy and
wax-free Indian shellac.
Processing:
The surfaces must be dry and free from contamination.
Unpleasant can be the presence of silicones and surfactants, as in almost all
modern paints and cleaners are used. In principle, effect varnishes (for example:
Hammered paint) not in the same room processed in particular be sprayed! Water in
Form of condensing humidity, introduced by inferior alcohol or
Water-dampened tools can cause loss of gloss and haze.
Workflow:
a) cleaning and sanding.
b) Priming with SCHWABBEL-POLISHING-BASE 26.20.20 instead of matting and
Pore ??filler, makes the Zupolieren and the actual basic polish significantly (historically
Early 20th century).
Important: shake up the KIROL-SCHELLACKPOLITUR before use!
c) Polish with KIROL-SCHELLACKPOLITUR, BIMSMEHL, KIRAD-POLIEROEL
d) polishing with KIROL-SCHELLACKPOLITUR, BIMSMEHL, KIRAD-BENZOE and KIRAD-
GRINDING FLUID
The use of polishing oil instead of linseed oil and grinding fluid instead of turpentine oil
reduce many problems and facilitate the polishing significantly, without affecting the
"Historical surface". Only 99% pure spirit should be used for the entire polish
become available with us as polishing alcohol 26.20.40. Depending on your liking and habit, the
Polish up to 70% with Siritus.
Addition of dilution 26.20.10 may slightly delay drying, if desired
become.
Further information and instructions for working with KIROL polishes can be found in our
Webshop: www.pianoteile.com
Characteristics:
Color: Lemon bright
Processing temperature: 21 ° C <= T <= 30 ° C
Rel. Humidity (F): 40% <= F <= 60%
Storage: cool, keep well closed! Pre-heat to at least 18 ° C before use!
KIROL SCHELLACKPOLITUR Additives:
Blonde 1 L 26.15.20
blond 5 L 26.15.21
black 1 L 26.15.30
black 5 L 26.15.31
Polished spirit 5 L 26.20.40
Dilution 1 L 26.20.10
Technical data
| Supplier no. | 262020 |
|---|---|
| MPN | N000060021706N |
| Weight | 1.265 kg |
| Unit | bot |
| Categories | 100 / Pianoparts - Materials / Lacquers - Abrasives - Polishes / Gehäuse - Oberflächenlackierung |
Documents
Specification
Product number: 262020