Description
- very good acoustic and adhesion properties.
- Highly loadable
- Tiles very well
- no brush strokes visible when worked cleanly
- can be applied very quickly with a roller or very cleanly with a paint brush
- is very quickly dust-dry, little susceptible to dust inclusions
The varnish is also excellent for satin-finished soundboards.
Hydroplast® PU. This lacquer can be applied very quickly and cures with an extremely high surface strength.
The acoustic result corresponds to today's sound sensation. As a one-component water-based varnish for brushing and rolling with a standard short-hair roller, Hydroplast® PU can be used as a primer and topcoat at the same time.
Hydroplast® PU does not yellow, so that the coating of bleached surfaces is also unproblematic.
Processing:
The application of Hydroplast® PU is very simple. The soundboard to be sealed must be finely sanded (100 - 120 grit), completely clean and dust-free. Hydroplast® PU is rolled on as thickly as possible with a special roller in one operation.
After 2-3 hours, a first intermediate sanding can be carried out. After the second roller application, it is recommended to dry through overnight.
Thinner:
Hydroplast® PU for brushing and rolling is ready to use, use water if necessary; also for cleaning.
- Highly loadable
- Tiles very well
- no brush strokes visible when worked cleanly
- can be applied very quickly with a roller or very cleanly with a paint brush
- is very quickly dust-dry, little susceptible to dust inclusions
The varnish is also excellent for satin-finished soundboards.
Hydroplast® PU. This lacquer can be applied very quickly and cures with an extremely high surface strength.
The acoustic result corresponds to today's sound sensation. As a one-component water-based varnish for brushing and rolling with a standard short-hair roller, Hydroplast® PU can be used as a primer and topcoat at the same time.
Hydroplast® PU does not yellow, so that the coating of bleached surfaces is also unproblematic.
Processing:
The application of Hydroplast® PU is very simple. The soundboard to be sealed must be finely sanded (100 - 120 grit), completely clean and dust-free. Hydroplast® PU is rolled on as thickly as possible with a special roller in one operation.
After 2-3 hours, a first intermediate sanding can be carried out. After the second roller application, it is recommended to dry through overnight.
Thinner:
Hydroplast® PU for brushing and rolling is ready to use, use water if necessary; also for cleaning.
Technical data
| Supplier no. | 261051 |
|---|---|
| MPN | 1711-000001 |
| Weight | 1.111 kg |
| Unit | can |
| Categories | 100 / Pianoparts - Materials / Lacquers - Abrasives - Polishes / Lacquer for Sound System |
Documents
Specification
Product number: 261051