Description
Description
Glue specially developed for gluing acoustic woods, which harmonises perfectly with spruce and maple in terms of colour.
- gap filling ability
- easy to sand.
- no shrinkage.
- excellent acoustic properties.
- used in the manufacture of the Bolduc acoustic elements.
Discover many other uses: Hammer gluing, repairing bridge doubles and many other high quality woodwork. The best wood glue on the market. The first and best choice of the acoustic woodworker!
Bolduc's Acoustic Wood Glue is the ideal adhesive for bridges, ribs, soundboards, and any other application where sound transmission is important. It is called "acoustic" because it shares the same properties as hot hide glue. It is also perfect as a structural wood glue.
This is a water-based glue that contains far less water than traditional glues -- making it not only heat and water resistant, but also an excellent gap filler. Because it dries like glass, it will not load up into sandpaper, a common problem with all other wood glues when sanding. Another great advantage is that there is no residue when drilling bridges -- the drills always come out clean
Applications
Set-up time can range from 2 to 4 hours (clamps can come off and sanding can take place) while
complete cure is about 24 hours. Shelf life is about 1 year, as long as the glue is transferred to another container for use and the lid does not remain off the original container for long periods of time.
Instructions for use
The open time and the setting time are very dependent on working conditions, e. g.
temperature, humidity, absorbency of the materials being used, amount applied
and tension in the material.
Good results will be achieved if the following conditions are observed:
Room, material and adhesive temperature 10°-30°C
Wood moisture content 5-10%
Relative humidity 20-70%
Amounts of adhesive to apply: for surface gluings N/A
for assembly gluings N/A
Open time at 5-10min
Press pressure for tension-free workpieces:
Minimum pressing times at 20°C, 30min
Wood preparation
All parts should fit well and be free from dust and grease. Excessive fit tolerance will lead to longer setting times and weaker bonds.
The joints should be made shortly before bonding.
Glue spread
Apply Bolduc´s acoustic glue evenly to one side using a glue spreading machine, a
serrated spatula or any other suitable device.
Pressing
Lay the items to be bonded together within the workable time and press them for as long a time as is needed to achieve sufficient initial strength.
Wood discolouration
Bolduc´s acoustic glue: does not cause discolouration of the wood. Iron in combination with the tannic acid of the veneer can however lead to changes of colour, particularly in the case of oak.
Cleaning
Clean work utensils with water before the adhesive dries.
Chemical/Technical data
Base: Liquid
Colour: white
pH value: 4 to 5.5 (Acidic)
Marking
Bolduc´s acoustic glue is not subject to the marking regulations pursuant to the
Dangerous Goods Act in its present version.
Storage
Store away from frost in tightly closed original containers.
Type: Polyvinyl acetate emulsion.
Classification according to DIN EN 204 - D 2 N/A
Glue specially developed for gluing acoustic woods, which harmonises perfectly with spruce and maple in terms of colour.
- gap filling ability
- easy to sand.
- no shrinkage.
- excellent acoustic properties.
- used in the manufacture of the Bolduc acoustic elements.
Discover many other uses: Hammer gluing, repairing bridge doubles and many other high quality woodwork. The best wood glue on the market. The first and best choice of the acoustic woodworker!
Bolduc's Acoustic Wood Glue is the ideal adhesive for bridges, ribs, soundboards, and any other application where sound transmission is important. It is called "acoustic" because it shares the same properties as hot hide glue. It is also perfect as a structural wood glue.
This is a water-based glue that contains far less water than traditional glues -- making it not only heat and water resistant, but also an excellent gap filler. Because it dries like glass, it will not load up into sandpaper, a common problem with all other wood glues when sanding. Another great advantage is that there is no residue when drilling bridges -- the drills always come out clean
Applications
Set-up time can range from 2 to 4 hours (clamps can come off and sanding can take place) while
complete cure is about 24 hours. Shelf life is about 1 year, as long as the glue is transferred to another container for use and the lid does not remain off the original container for long periods of time.
Instructions for use
The open time and the setting time are very dependent on working conditions, e. g.
temperature, humidity, absorbency of the materials being used, amount applied
and tension in the material.
Good results will be achieved if the following conditions are observed:
Room, material and adhesive temperature 10°-30°C
Wood moisture content 5-10%
Relative humidity 20-70%
Amounts of adhesive to apply: for surface gluings N/A
for assembly gluings N/A
Open time at 5-10min
Press pressure for tension-free workpieces:
Minimum pressing times at 20°C, 30min
Wood preparation
All parts should fit well and be free from dust and grease. Excessive fit tolerance will lead to longer setting times and weaker bonds.
The joints should be made shortly before bonding.
Glue spread
Apply Bolduc´s acoustic glue evenly to one side using a glue spreading machine, a
serrated spatula or any other suitable device.
Pressing
Lay the items to be bonded together within the workable time and press them for as long a time as is needed to achieve sufficient initial strength.
Wood discolouration
Bolduc´s acoustic glue: does not cause discolouration of the wood. Iron in combination with the tannic acid of the veneer can however lead to changes of colour, particularly in the case of oak.
Cleaning
Clean work utensils with water before the adhesive dries.
Chemical/Technical data
Base: Liquid
Colour: white
pH value: 4 to 5.5 (Acidic)
Marking
Bolduc´s acoustic glue is not subject to the marking regulations pursuant to the
Dangerous Goods Act in its present version.
Storage
Store away from frost in tightly closed original containers.
Type: Polyvinyl acetate emulsion.
Classification according to DIN EN 204 - D 2 N/A
Technical data
| Supplier no. | 260557 |
|---|---|
| Weight | 0.77 kg |
| Unit | bot |
| Categories | 100 / Pianoparts - Materials / Adhesives |
Documents
Specification
Product number: 260557