Description
Fish glue, the warm glue substitute
This glue is ideal for all glue joints in piano construction. Due to the high initial adhesion, the parts to be glued can be ideally positioned. Particularly when cutting out the soundboard, the shavings are held firmly in the gap without being washed out again.
- Good initial adhesion
- open time approx. 10 - 15 min
- solid after approx. 2 - 3 hours
- glass-hard curing, good for sanding
- can be diluted with water or thickened with sawdust
- removable with water vapour, insensitive to frost
Fish Glue is natural glue made of fish skin, consisting of pure collagen. The processing is similar to the production of fish gelatine, using the same high quality raw materials. It is employed in the same way as cold-setting adhesives, but has the excellent characteristics of hot glue, becomes very hard and is easily dissolved making it ideal for parts that periodically need re-gluing due to wear, e.g. key-bushings. In pianos it is used for soundboard repair and general wood joints.
Materials: wood, felt, leather, cork, paper, rubber, glass
Shear strength on wood 50%: ca 3200 PSI ˜ 21 N/mm²
End hardening time: 12 to 24 hours
Open time: 1.5 to 2 hours
Initial tack: after ca 1 minute
Bond is stable between --34°C and +260°C
Can be dissolved with hot steam
Owing to the varying absorption properties of materials and room temperatures, we can accept no liability for these specifications.
Safety advice:
Rinse with water if there has been eye contact
In case of skin contact, wash off with warm water and soap
Biodegradable, ph value 5.4
Not classified as dangerous material
Can be transported without harm up to minus 10°C
Minimum durability: 3 years after leaving factory
This glue is ideal for all glue joints in piano construction. Due to the high initial adhesion, the parts to be glued can be ideally positioned. Particularly when cutting out the soundboard, the shavings are held firmly in the gap without being washed out again.
- Good initial adhesion
- open time approx. 10 - 15 min
- solid after approx. 2 - 3 hours
- glass-hard curing, good for sanding
- can be diluted with water or thickened with sawdust
- removable with water vapour, insensitive to frost
Fish Glue is natural glue made of fish skin, consisting of pure collagen. The processing is similar to the production of fish gelatine, using the same high quality raw materials. It is employed in the same way as cold-setting adhesives, but has the excellent characteristics of hot glue, becomes very hard and is easily dissolved making it ideal for parts that periodically need re-gluing due to wear, e.g. key-bushings. In pianos it is used for soundboard repair and general wood joints.
Materials: wood, felt, leather, cork, paper, rubber, glass
Shear strength on wood 50%: ca 3200 PSI ˜ 21 N/mm²
End hardening time: 12 to 24 hours
Open time: 1.5 to 2 hours
Initial tack: after ca 1 minute
Bond is stable between --34°C and +260°C
Can be dissolved with hot steam
Owing to the varying absorption properties of materials and room temperatures, we can accept no liability for these specifications.
Safety advice:
Rinse with water if there has been eye contact
In case of skin contact, wash off with warm water and soap
Biodegradable, ph value 5.4
Not classified as dangerous material
Can be transported without harm up to minus 10°C
Minimum durability: 3 years after leaving factory
Technical data
| Supplier no. | 260500 |
|---|---|
| Weight | 0.363 kg |
| Unit | bot |
| Categories | 100 / Pianoparts - Materials / Adhesives |
Documents
Specification
Product number: 260500