Description
The compact design reaches very close to the rim and bridges. The 1” x 1” x 1/8” guide angle mounts instantly to the soundboard using double-stick 3M Mounting Tape. There is no need to drill holes in the soundboard or rig up complicated clamping arrangements. The Router Base rides along the fence like a mono-rail, guaranteeing complete control with no danger of veering off course.
The base has both cross-wise and lengthwise fence slots; this allows the router base to slide along the guide fence in two modes, either parallel to the fence, or crosswise to the fence, depending upon the location of the crack in relation to the rim and bridges.
The air tool mounting bracket adjusts fore-and-aft on the base. This allows you to increase the width of the groove up to 7/8” to clean up wandering or multiple cracks without relocating the guide fence. Multiple fence slots in the router base allow routing of two exactly parallel grooves, without moving the fence, for replacement of panels up to 5 1/2” wide The Soundboard Router Bit is custom made to our shims S-XL (# 101053, -54, -55), this bit lets you achieve perfect, machined wood joints in a fraction of the time required for hand shimming. The two-flute solid carbide design will not clog or burn and is ideal for use with our router base.
Very compact yet powerful, it uses only 3cfm @ 90psi. (A typical 2 1/2 h.p. compressor will do, but a larger one will allow more “off” time).
With a rotary rasp or small drum sander in the chuck, this tool is also very useful for freehand carving and shaping jobs such as fitting pinblocks to plate flanges.
This is impressively demonstrated in DVD’s (# 101459, -61, -62) by Christian Bolduc, or even better in his seminars.
The base has both cross-wise and lengthwise fence slots; this allows the router base to slide along the guide fence in two modes, either parallel to the fence, or crosswise to the fence, depending upon the location of the crack in relation to the rim and bridges.
The air tool mounting bracket adjusts fore-and-aft on the base. This allows you to increase the width of the groove up to 7/8” to clean up wandering or multiple cracks without relocating the guide fence. Multiple fence slots in the router base allow routing of two exactly parallel grooves, without moving the fence, for replacement of panels up to 5 1/2” wide The Soundboard Router Bit is custom made to our shims S-XL (# 101053, -54, -55), this bit lets you achieve perfect, machined wood joints in a fraction of the time required for hand shimming. The two-flute solid carbide design will not clog or burn and is ideal for use with our router base.
Very compact yet powerful, it uses only 3cfm @ 90psi. (A typical 2 1/2 h.p. compressor will do, but a larger one will allow more “off” time).
With a rotary rasp or small drum sander in the chuck, this tool is also very useful for freehand carving and shaping jobs such as fitting pinblocks to plate flanges.
This is impressively demonstrated in DVD’s (# 101459, -61, -62) by Christian Bolduc, or even better in his seminars.
Technical data
| Supplier no. | 400030 |
|---|---|
| Weight | 2.2 kg |
| Unit | pce |
| Categories | 100 / Tools - Equipment / Wood Tools / Soundboard - pinbloc |
Documents
Specification
Product number: 400030